Disponibile dal: 23/10/2015
Rialzo per facilitare l'accesso ai pedali posti in seconda fila.
The Pedal Space Elevators gives you easier access to the pedals located in the upper rows of the Pedal Space.
Simply attach the Pedal Space Elevator to your preferred location and put the pedals on it.
Lay down the Pedal Space Elevator with the flat surface facing downward.
Attach the narrow Velcro® strips to the areas shown.
Make sure to you use the opposite side of the Velcro® that is already located on your Pedal Space.
Turn the Pedal Space Elevator so that the flat surface is facing upward.
Attach the wide Velcro® strips to the areas shown.
Make sure that you use the opposite side of the Velcro® that is already located on your Pedal Space.
Place the Pedal Space Elevator in your preferred location on your Pedal Space and press firmly.
Attach the opposite side of the Velcro® used on the Pedal Space Elevator surface to the devices then push firmly and carefully on the top surface of the Pedal Space Elevator.
Connect all necessary cables and your Pedal Space Elevator is ready to go.
If you do not plan on changing the location of your Pedal Space Elevator, you can firmly attach it to your Pedal Space with the included screws.
Just put the Pedal Space Elevator in your preferred location, mark the position of the 4 holes on the Pedal Space then drill with a 3 mm diameter.
Position the screws and screw them tight.
No customer comments for the moment.